Tropitone Fire Pit Troubleshooting

If the air holes or air intake vent have been plugged or don t exist at all you may have a hard time getting a fire to burn.

Tropitone fire pit troubleshooting.

To remove the terminal cap or replace the battery take a flathead screwdriver and insert the tip into the slot at the bottom of the case. The burner system produces a wide range of heat output peaking at 90 000 btus. Mounted on the fire pit side wall as shown. The 9 volt battery which is installed in tropitone fire pits is shipped with a battery terminal cover which must be removed prior to the first use of the fire pit.

The main burner should be inspected thoroughly to insure there is no blockage as well as no damage before lighting if the fire pit has been sitting idle for an extended period of time. A common problem with these fire pits is that they won t stay lit unless you hold the knob i found the fixwant this fire pit. Use a nail to clean out holes and air intake openings. The spark used to ignite your fire pit comes from a 9 volt battery located in this housing.

To replace the battery unscrew the round cap by turning counter clockwise left and pull out the battery. Open the valve on the propane tank all the way and make sure the tank has fuel picking up the tank and estimating its weight is often the best way to tell. Just like a gas oven or gas heater are gas appliances a fire pit is also a gas appliance and therefore proper precautions must be taken in order to ensure safety during installation and use always be sure to follow the guidelines specified by the manufacturer in the installation. This range of output provides the user with versatility for variations in outdoor temperature and activities.

To work correctly the fire pit must have a constant supply of air. Gas fire pit troubleshooting having issues with your fire pit. To test the air flow leave the loading door open and check whether the fire burns more brightly. Install new battery and tighten cap completely by turning clockwise right to insure a good connection.

Fire pit pilot won t light the first step in the troubleshooting procedure is to ensure that the propane tank is not empty.